USED Fender USA Fender / Eric Clapton Signature Stratocaster Black [20]

The body is made of carefully selected alder, the neck is one-piece maple, and the neck shape is the soft "V" shape that Clapton loved so much, with a 9.5 radius fingerboard and vintage-type frets.
Three "Vintage Noiseless" single-coil pickups are mounted on the pickup system, which not only reduces noise, but also produces a very fat and responsive sound.
The "TBX Tone Control"" is also equipped, allowing you to freely control the high and low frequencies, so it can be used for a wide range of sounds from sweet fronts to jangly cutting sounds.

* After we received this guitar, we have adjusted the rod, octave, and string height, so it is in good playing condition.

There are some bends and chips on the back panel, and both the pickguard and back panel are burnt and dark in color.
There are many fine scratches on the body back, and overall, there are signs of use, such as parts chinks, rust, fine scratches, and small dents.

Item rank: B+ (Good)

Year of manufacture: Made in 2003
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine arm
Country of Origin ： USA
Weight ： 3.75kg
Serial ： SZ3041911

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.8mm
Neck thickness(near 1st fret)|21.4mm
Neck thickness (near 12th fret)|22.5mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings at setup|-
Repair and maintenance parts|rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.8mm

Neck Thickness (near 1st fret)
21.4mm

Neck Thickness (near 12th fret)
22.5mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings at setup
-1.5" (9.5")

Repair and maintenance parts
Rod adjustment, octave adjustment, string height adjustment