USED Martin Martin / 2004 000-28EC Eric Clapton Signature [20]

Eric Clapton signature model "000-28EC".
It has the same specifications as "000" with spruce-top rosewood sides and back, ebony fretboard and bridge, but it also has vintage touches such as herringbone on the soundhole as well as the trim, V-shaped and wide neck, and body color finished with candy lacquer and scalloped bracing. The body color is finished with American lacquer, and the scallop bracing is full of vintage taste.
This is a model that Martin fans would love to own at least once.
The name of the artist engraved on the 20th fret is a true gem.
P.U.(L.R.Baggs/iBEAM) is installed afterwards, and it is useful as an acoustico for live performances and recordings.

* After our arrival, it has been cleaned, string replaced, rod adjusted, string height adjusted and rubbed.
The neck is in good playing condition.

There is a gap in the binding at the neck joint on the back of the body.
There are other minor scratches and dents.

Item rank: B+ (Good)

Year of manufacture: 2004
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 2.05kg
Serial ： 1002951/9171

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod (high spring)
Fret height is sufficient.
String height (bass string side)|2.4mm above 12th fret
String height(treble string side)|1.8mm above 12th fret
Nut width|45.1mm
Neck thickness(near 1st fret)|21.6mm
Neck thickness(near 12th fret)|-
SCALE|632.46mm (24.9")
RADIUS|381mm (15")
Strings for setup|D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.4mm above the 12th fret

String height (treble string side)
1.8mm above 12th fret

Nut width
45.1mm

Neck Thickness (near 1st fret)
21.6mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
632.46mm (24.9")

RADIUS
381mm (15")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, and alignment