USED Killer Killer / KG-EXPLODER Delicious Red [20]

Produced by Akira Takasaki of Loudness in 1987, this shape is popular for its excellent body balance and playability.
Maple is used for the body material, which produces a sharp, edgy sound with a long sustain.
The output is a rock sound with excellent sustain and good rise.
The U-shaped neck, which is not too thin, is also very playable and has a characteristic crunchy sound, and in combination with the maple body, produces a crisp, gurgling metal sound.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised, so it is in good playing condition.

There is a paint chip on the lower tip of the body on the front left side, which is characteristic of deformed guitars.
There is a ding with clear paint cracking around the side of the switch.
There are other minor scratches and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 2012
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Genuine arm
Weight ： 3.88kg
Serial ： K12130413

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.6mm
Neck thickness(near 1st fret)|20.9mm
Neck thickness (near 12th fret)|23.2mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.6mm

Neck Thickness (near 1st fret)
20.9mm

Neck Thickness (near 12th fret)
23.2mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing