USED Ibanez Ibanez / J-LINE RG6HSHFX Black Flat [20]

The RG6HSHFX is a Made In Japan RG from the Ibanez "J-LINE" series.
The RG6HSHFX features an ultra-thin "SuperWizard" shape neck, which was designed for ease of playability and thinness, and a 5pcs construction made of 3-piece maple and 2-piece walnut laminate for rigidity.
This shape is ideal for players who prefer the lightest possible grip, and is the reason why Ibanez pioneered the thin neck.
The V7/V8 pickups, which were widely used in the late 90s when loud music was at its peak, are employed.
The single pickup is the S1, which was designed to be used with the V7/V8.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and electrical repair have been done.
The neck is a little high and the 6th string side is a little wavy, but the sound is not clogged.

There is a small ding on the side of the 2nd string peg with a paint chip, but other than that, it is in good condition with only minor scratches.

Item rank: B+ (Good)

Year of manufacture: 2022
Truss rod: There is plenty of room.
Fretboard: 80% or more
Accessories ： Soft case / Genuine
Country of Origin ： Japan
Weight ： 3.22kg
Serial ： F2207731

Truss Rod: No problem, confirmed to 60 degrees left and right (with a little high spring)
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.3mm
Neck thickness(near 1st fret)|17.5mm
Neck thickness (near 12th fret)|19.1mm
SCALE|648mm (25.5")
RADIUS|381mm (15")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.3mm

Neck Thickness (near 1st fret)
17.5mm

Neck Thickness (near 12th fret)
19.1mm

Scale
648mm (25.5")

RADIUS
381mm (15")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair