USED Burny Burny / MG-145S Yellow Heart hide Model [20]

The MG-145S is a reproduction of the Hide model from Burny by Fernandes.
The original model was introduced in 1996 and was used by XJAPAN until their last live performance.
This model has developed into the iconic "hide is associated with yellow hearts" design, and is equipped with a full-mode sustain control system to create an ultra-long sustain.

* After our arrival, it has been cleaned, strings replaced, rods adjusted, octave adjusted, string height adjusted, frets replaced, and neck ironed out, so it is in good playing condition.

Two knob decorations are missing, and the plating on the gold parts is smudged and faded.
There are numerous corner chips characteristic of deformed guitars, and overall there are numerous dents with scratches, paint chips, and paint dings.

Item rank: B+ (Good)

Truss rod: There is plenty of room.
Fretboard: 60-70%.
Accessories ： Soft case / Non-genuine
Weight ： 3.25kg
Serial : No

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.0mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness (near 12th fret)|22.4mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret replacement, neck ironing correction

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
41.0mm

Neck Thickness (near 1st fret)
22.0mm

Neck Thickness (near 12th fret)
22.4mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret replacement, neck ironing