USED Killer Killer / KG-EXPLODER Metalic Green [20]

Produced by Akira Takasaki of Loudness in 1987, this shape is popular for its excellent body balance and playability.
Maple is used for the body material, which produces a sharp, edgy sound with a long sustain.
The output is a rock sound with excellent sustain and good rise.
The U-shaped neck, which is not too thin, is also very playable and has a characteristic crunchy sound, and in combination with the maple body, produces a crisp, gurgling metal sound.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

There are some parts that have some cracks, but there are no corner cracks or corner chips characteristic of deformed guitars, and only minor scratches and small dents, so it is in good condition.

Item rank: B+ (Good)

Year of manufacture: 2011
Truss rod: There is plenty of room.
Fret: 60-70%.
Accessories ： Soft case / Genuine arm
Weight ： 3.57kg
Serial ： K11752303

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.5mm
Neck thickness(near 1st fret)|19.4mm
Neck thickness (near 12th fret)|22.2mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.5mm

Neck Thickness (near 1st fret)
19.4mm

Neck Thickness (near 12th fret)
22.2mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment