USED Fender Japan Fender Japan / JB62-650FL(YO-036) 3Tone Sunburst [20]

Both the neck and body have ORDER MADE stamps and are marked YO-036 JB-62FL, and the neck date is 1990.
This is a Fender Japan 62 Jazz Bass Fretless JB62-650FL.
This is the most standard fretless jazz bass specification, and has a round, warm, soft tone.
The fret line makes this model suitable for those who play fretless bass for the first time.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, sponge replacement under pickups, and electrical repair have been done.
The neck has a high up condition, so the string height has been adjusted to the current level.

The paint on the back of the neck and body contour is burnished, and there are some small dents with paint chips that have been touched up.
There are other minor scratches and dings.

Item rank: B+ (Good)

Year of manufacture: 1990
Truss Rod ： Nearly tightened
Accessories: Hard Case / Non-Genuine
Country of Origin ： Japan
Weight ： 4.33kg
Serial ： MIJ G016539

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|3.0mm above 12th fret
String height(treble string side)|2.5mm above 12th fret
Nut width|38.0mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness (near 12th fret)|25.0mm
SCALE|864mm (34")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, sponge replacement under pickups, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
3.0mm above the 12th fret

String height (treble string side)
2.5mm above 12th fret

Nut Width
38.0mm

Neck Thickness (near 1st fret)
22.0mm

Neck Thickness (near 12th fret)
25.0mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, sponge replacement under pickups, electrical repair