USED Fender Japan Fender Japan / ST-43 3Tone Sunburst/Maple [20]

The ST-43 was one of Fender Japan's most reasonably priced models at the time.
It is a full-fledged model with a basswood body and maple neck with rosewood fingerboard, and is still a popular guitar today due to its high built-in quality that can only be achieved by domestic production.
Although it is an entry-level model, the solid construction and well-balanced wood and parts in various parts make it a model with which you can fully enjoy the Stratocaster sound.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

It is in good condition with only minor scratches and small dings.

Item rank: B+ (Good)

Year of manufacture: 1993-1994
Truss Rod ： Plenty of room
Fret: 60-70%.
Accessories ： Soft case / Genuine arm
Country of Origin ： Japan
Weight ： 3.24kg
Serial ： MIJ Q082095

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.3mm
Neck thickness(near 1st fret)|21.5mm
Neck thickness (near 12th fret)|23.5mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.3mm

Neck Thickness (near 1st fret)
21.5mm

Neck Thickness (near 12th fret)
23.5mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment