USED momose momose / MTL2-STD/M Natural [20]

This is the MTL2-STD by Momose.
This is the most typical Terry sounding model with ash body and maple 1P neck specification.
The TL model with this specification is popular as a guitar held by vocalists, but many country and Jazz instrumental guitarists also love to use this guitar.
It is equipped with TWANG50 TL pickups and has a clean lead sound and crisp cutting rear pickup and a jazzy and warm front sound.

* It is in good playing condition as it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, grated, and electrical repairs have been done since we received it.

There are some parts have some scuffs, and there are a few small dents on the body with paint dents, and other minor scratches and dings.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Semi-hard case / Genuine
Country of Origin ： JAPAN
Weight ： 3.31kg
Serial ： 10488

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.3mm
Neck thickness(near 1st fret)|23.2mm
Neck thickness (near 12th fret)|24.5mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.3mm

Neck Thickness (near 1st fret)
23.2mm

Neck Thickness (near 12th fret)
24.5mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair