USED Fender USA Fender / American Vintage 72 Telecaster Custom Natural [20]

The Telecaster head with F-KEY pegs has a black CBS logo, a bullet nut that allows neck adjustment on the head side, a three-point bridge with micro-tilt, and other highly functional hardware.
The large pickguard and front pickups are equipped with humbuckers, and many specifications not found on previous Telecasters are employed, such as a pickup selector with a toggle switch and 2 volume/2 tone controls.
This model has the sharp sound of the rear pickup and the fat and warm sound of the front pickup, making it a highly practical model.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

There is a ding on the corner of the body with a small paint chip.
There are other minor scratches and dings.

Item rank: B+ (Good)

Year of manufacture: Made in 2003
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 3.52kg
Serial ： Z3135914

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.5mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.5mm

Neck Thickness (near 1st fret)
22.0mm

Neck Thickness (near 12th fret)
23.0mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment