USED YAMAHA Yamaha / SG-30 Natural [20]

The "SG" series continues to enjoy strong popularity today and has earned a reputation for its high quality.
In 1974, the "SG-175," which became the prototype model of the current SG series with its symmetrical body shape and adoption of arrow design position marks, was released, and this model was sold at a reasonable price.
The body is made of Katsura wood, the neck is mahogany with rosewood fingerboard, and the pickups are Yamaha's original humbuckers "#1157F".

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised.
The neck has a high spring and the frets have been adjusted by fret adjustment, but the frets are very low.

One bushing for the lower joint screw on the 6th string side is missing.
There are scratches, dents, and other signs of use due to age.

Item rank: B+ (Good)

Year of manufacture: 1970s
Truss rod: There is enough room.
Fretboard : Less than 50%.
Accessories ： Hard case / Genuine
Country of Origin ： JAPAN
Weight ： 3.23kg
Serial ： 27443

Truss Rod : No problem, confirmed up to 60 degrees to the left and right (with waviness)
Fret remainder is defective and needs to be replaced at the time of next repair.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|20.2mm
Neck thickness (near 12th fret)|24.3mm
SCALE|628mm (24.75")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret remainder
Defective, need to consider replacing at the next repair.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
42.2mm

Neck Thickness (near 1st fret)
20.2mm

Neck Thickness (near 12th fret)
24.3mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing