USED Fender USA Fender / American Vintage 62 Jazz Bass 3-Color Sunburst [20]

This is a 1995 Fender USA American Vintage 62 Jazz Bass 3knob.
This is a Jazz Bass from the popular American Vintage series that reproduces the specifications of the 1962 Jazz Bass.
This is a faithful reproduction of the Jazz Bass with an alder body, maple neck, slab-applied rosewood fingerboard, Transition logo and 3-knob specifications.
The bridge has been replaced with a Badass II.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenor adjustment, and electrical repair have been done.
The neck has a high spring symptom and has been adjusted by fret adjustment and shimming, but the high frets of the bass strings are currently slightly chattering.

The clear paint on the top of the body has peeled off, and there are numerous dents with paint chips throughout.

Item rank: B (average)

Year of manufacture: 1995
Truss Rod: Nearly fully tightened
Fretboard: 60-70% full
Accessories ： Hard Case / Genuine
Country of Origin ： USA
Weight ： 4.42kg
Serial ： V080755

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|38.5mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|25.0mm
SCALE|864mm (34")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above the 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
38.5mm

Neck Thickness (near 1st fret)
20.7mm

Neck Thickness (near 12th fret)
25.0mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair