USED YAMAHA Yamaha / SGV700 Red Mettalic [20]

This 3-single pickup model has an ingenious construction with the center and rear pickups integrated into one unit, a slanted front pickup arrangement, and one volume, one tone, and one balancer control, truly Blue Jeans custom specifications.
The SGV tremolo unit features a high mechanism with ball-bearing built-in moving parts and roller saddles for smooth operation and natural pitch changes when arming.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised, so it is in good playing condition.

The gold parts have some spots, but other than that, it is in good condition with only minor scratches and small dents.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret: 60-70%.
Accessories: Soft case / Non-genuine arm
Weight ： 3.83kg
Serial ： Q019270

Truss Rod : No problem
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.2mm
Neck thickness(near 1st fret)|20.6mm
Neck thickness (near 12th fret)|23.6mm
SCALE|628mm (24.75")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.2mm

Neck Thickness (near 1st fret)
20.6mm

Neck Thickness (near 12th fret)
23.6mm

Scale
628mm (24.75")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing