USED Fender Japan Fender Japan / TL52-70 Butterscotch Blonde [20]

This model is a reproduction of the first model of the Fender Telecaster, the '52 model.
The body is made of Sen wood, and a one-piece maple neck is used for a crisp sound.
The pickguard is made of 1-ply pickguard with 5-point stoppers, and all screws are flat head screws.
The vintage-inspired tone of this guitar is superb.
There are TLC52 stamps on the neck and neck pocket, and the neck date indicates that it was made in 1985.

* The pickguard is bent due to age.
* This guitar has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, electrical repair, mortise and tenon nut adjusted since we received it, so it is in good playing condition.

There is a ding on the front left side of the body top with a paint chip, and a ding on the right side of the body back with a paint dent.
Other parts have some scuffs, and there are some minor scratches and small dents.

Item rank: B+ (Good)

Year of manufacture: 1985-1986
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories: Gig bag/not genuine
Country of Origin ： Japan
Weight ： 3.50kg
Serial ： MIJ A016842

Truss Rod: No problem (slight waviness)
Fret remainder: Still can withstand cutting, but the frets are low.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|20.4mm
Neck thickness (near 12th fret)|22.9mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but not necessarily in real time.

specs

Truss Rod
No problem (slight waviness).

Fret Remaining
There is a note that the frets are still low enough to withstand cutting.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.2mm

Neck Thickness (near 1st fret)
20.4mm

Neck Thickness (near 12th fret)
22.9mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon nut adjustment