USED Vanzandt Vanzandt / STV-Custom Refinish Dakota Red [20]

The STV-R1 is made of carefully selected, well-dried ash wood and a hard maple neck, recreating the style of the 50's. It has a slightly bright sound with a comfortable mid-low range.
This guitar has a slightly bright sound, but can be played with a comfortable feeling in the mid-low range.

* Based on the STV-R1, the body color, pickguard, and control knobs have been customized.
Three Vanzandt True Vintage pickups are installed.
The neck end and body joint are marked ""10032301"".

* This guitar has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted since we received it, so it is in good playing condition.

There are some weather checks on the paint and a chip on the side of the jack plate.
There are other minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret: 60-70%.
Accessories: Gig bag / Genuine arm spring
Country of Origin ： JAPAN
Weight ： 3.48kg
Serial ： 5784

Truss Rod : No problem.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.5mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|23.5mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.5mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
23.5mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment