USED Ruina Miyashiro / Cocytus 7st Snow ice [20]

Cocytus" is an original guitar by Ruina Miyashiro, a brand made in Yamanashi, Japan.
Ash body, wenge neck, and purple heart fretboard are used. The pickups are mounted with a combination of Seymour Duncan Sentient & Nazgul.
The neck has two carbon rods, and the model also features a rather large volute.
In addition, the heel processing that enhances accessibility to the unique high position and the Purple Heart on the top of the PU are also unique and strong.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

There are small dents with paint chips and wood dents on the top and sides of the body top.
There are minor scratches and dents throughout the body.

Item rank: B+ (Good)

Truss Rod: Nearly fully tightened
Fretboard: 60-70% full
Accessories: Soft case / Non-genuine lock pin
Country of origin: Japan
Weight ： 3.44kg
Serial ： No serial number

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod (not much left)
Fret height is sufficient.
String height (bass string side)|2.1mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|48.0mm
Neck thickness(near 1st fret)|20.8mm
Neck thickness (near 12th fret)|24.1mm
SCALE|686mm (27")
RADIUS|406mm (16")
Strings used for setup|D'Addario EXL120-7 / .09-.54 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.1mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
48.0mm

Neck Thickness (near 1st fret)
20.8mm

Neck Thickness (near 12th fret)
24.1mm

Scale
686mm (27")

RADIUS
406mm (16")

Strings for setup
D'Addario EXL120-7 / .09-.54 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment