USED Ibanez Ibanez / SR4FMBLTD TRF Transparent Red Flat [20]

The SR4FMBLTD is Ibanez's 2015 limited edition SR4FMBLTD featuring flame maple in the SR shape, a favorite for its thin neck and excellent fit.
It features a flame maple top/mahogany back, 5P maple/rose neck, rose fretboard, CAP EXF-N2 PU, Vol/Bal/3-band EQ, 19mm pitch bridge, and a gloss-free finish.
Paint finish with original wood grain texture, thin and narrow neck for easy grip, and deep cutaway on the 1st string side for easy access to the high position.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted.
The neck has a high spring symptom, and there is a little chatter in the live sound, but it sounds fine through the amp.

There are finger marks and scratches on the paint between the pickups on the 4th string side.
There are many scratches and small dents overall.

Item rank: B+ (Good)

Year of manufacture : 2015
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Genuine
Country of Origin ： Indonesia
Weight ： 3.88kg
Serial ： I150713421

Truss rod: No problem, confirmed up to 60 degrees to the left and right (high spring)
Fret height is sufficient.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|38.0mm
Neck thickness(near 1st fret)|19.5mm
Neck thickness (near 12th fret)|21.9mm
SCALE|864mm (34")
RADIUS|305mm (12")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above the 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
38.0mm

Neck Thickness (near 1st fret)
19.5mm

Neck Thickness (near 12th fret)
21.9mm

Scale
864mm (34")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment