USED Paul Reed Smith (PRS) / SE Torero Purple Burst [20]

This unique model is equipped with EMG pickups and a Floyd Rose.
This is one of the most popular specs in the SE series, even though it is manufactured in a very rare spec in the PRS lineup.
Maple top/mahogany back body with maple neck. Through-neck construction with an ebony fingerboard without inlays.
Flat top and jumbo frets for high playability, and the royal combination of EMG 81/85 suitable for modern sound, this is a high-cost performance model with excellent compatibility with high-gain.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and rubbed together, so it is in good playing condition.

The strap pins have been replaced and the truss rod cover is missing.
There are numerous buckle scratches on the body back and some small paint chips.
Overall, there are some minor scratches, small dings, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 2011
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Genuine arm
Country of Origin ： Korea
Weight ： 3.74kg
Serial ： L16831

Truss Rod: No problem, confirmed to be 60 degrees left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.7mm
Neck thickness(near 1st fret)|20.1mm
Neck thickness (near 12th fret)|22.3mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.7mm

Neck Thickness (near 1st fret)
20.1mm

Neck Thickness (near 12th fret)
22.3mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing