USED Fender Japan Fender Japan / ST62-770LS 3Tone Sunburst [20]

This is a 1989 Fender Japan Stratocaster with Race Sensor PU and mid boost.
The controls are Master VOL/Master TONE/Mid Boost specs, but we think the boost is set to a slightly milder effect.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, grated, and electrical repairs have been done, so it is in good playing condition.

Arm and back plate are missing.
There is a ding on the top of the body with paint dents, and other parts have some scuffs, and there are some minor scratches and small dings.

Item rank: B+ (Good condition)

Year of manufacture: 1989
Truss Rod ： Nearly fully tightened
Fretboard: 60-70% full
Accessories ： Soft case / Genuine
Country of Origin ： Japan
Weight ： 3.59kg
Serial ： MIJ E962476

Truss Rod: No problem, confirmed up to 60 degrees left and right (not much left)
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.6mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|24.4mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.6mm

Neck Thickness (near 1st fret)
20.7mm

Neck Thickness (near 12th fret)
24.4mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair