USED Fender USA Fender / 1967 Mustang Bass Blue [20]

Judging from the neck and pot date, it was made in 1967.
This instrument has an uncontoured body, and the body material is also painted on the neck joint and cannot be identified.
It has a maple neck/rose fingerboard and paddle pegs, a specification from 1966 to 1968.
Weighing approximately 3.59kg, this short scale guitar has a thick low mid tone with a strong, fat sound.
Neck Date: 17DEC66B, P.U. Date: 4.7.67, Joint plate has been replaced and serial number is unknown.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and rubbed together, so it is in good playing condition.

The bridge mute is missing.
There are numerous dents with paint dings and small paint cracks throughout, including the back of the neck.
There is a burn mark next to the fourth string peg and weather checks on the paint.
There is no Fender logo on the case that comes with the instrument, but a short scale chipboard case is included.
The case is damaged and torn.

Item rank: B+ (Good)

Year of manufacture: 1967
Truss Rod ： Plenty of room
Fretboard: 60-70%.
Accessories ： Hard case / Non-genuine
Country of Origin ： USA
Weight ： 3.59kg
Serial ： No serial number

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fretboard: No problem, enough fretboard height.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.1mm above 12th fret
Nut width|41.0mm
Neck thickness(near 1st fret)|21.8mm
Neck thickness (near 12th fret)|25.0mm
SCALE|762mm (30")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL170M / .045-.100 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.1mm above 12th fret

Nut Width
41.0mm

Neck Thickness (near 1st fret)
21.8mm

Neck Thickness (near 12th fret)
25.0mm

Scale
762mm (30")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL170M / .045-.100 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing