USED Fender USA Fender / 1979 Stratocaster Olympic White [20]

The large head, modern logo, two string guides, bullet truss rod that allows neck adjustment from the head side without removing the neck, three-point neck joint plate, and micro-tilt internal neck joint that allows easy adjustment of the neck insertion angle with a hexagonal wrench, This 1979 Fender Stratocaster is both visually and functionally distinctive.
The maple neck and rosewood fingerboard are joined by a rosewood roundboard with a rounded surface, which gives a well-balanced and warm sound in all positions.
The high notes that are characteristic of this era are combined with a solid core mid and low tones, giving this Stratocaster a vintage sound that does not get lost in distortion.

* After we received this guitar, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and rubbed together, so it is in good playing condition.
The frets are very low, but there is no sound jamming.

The back plate is missing.
There is a crack in the paint on the top contour of the body, and there are some cracks in the clear paint on the back of the neck.
There are other signs of use such as scratches and dents.
One of the clasps of the hard case is broken.

Item rank: B+ (Good)

Year of manufacture: 1979
Truss rod : There is enough room.
Fretboard : Less than 50%.
Accessories ： Hard case / Genuine tremolo arm, bridge cover
Country of Origin ： USA
Weight ： 4.34kg
Serial ： S901332

Truss Rod : No problem.
Fret rests are defective and need to be replaced at the time of next repair.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.1mm
Neck thickness(near 1st fret)|21.7mm
Neck thickness (near 12th fret)|24.4mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder
Defective, need to consider replacing the frets at the next repair

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
41.1mm

Neck Thickness (near 1st fret)
21.7mm

Neck Thickness (near 12th fret)
24.4mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing