USED Gibson USA Gibson / 1988 Pre-Historic Les Paul Reissue Cherry Sunburst [20]

This vintage reissue model was manufactured and released between the late 1980s and 1993.
It has a gorgeous figured maple top that sets it apart from the regular lineup, and the serial number is stamped in the same way it was in 1959.
The pickups installed on this guitar vary depending on the production period, but this model is equipped with two "57 Classic" pickups, which were highly regarded as the ultimate PAF replica at the time and are still one of Gibson's most representative pickups today.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, mortised, and electrical repairs have been done, so it is in good playing condition.

There is a crack on the pickguard.
There are some parts that have some cracks and rust, and there are many paint dents on the back of the body due to the buckle.
There are many other scratches and dents on the overall surface.
There is damage to the hard case key that comes with the instrument.

Item rank: B+ (Good)

Year of manufacture: 1988
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 4.08kg
Serial ： 8 0024

Truss Rod : No problem (slight waviness)
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|24.3mm
SCALE|624mm (24.56")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem (slight waviness).

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
43.0mm

Neck Thickness (near 1st fret)
20.7mm

Neck Thickness (near 12th fret)
24.3mm

Scale
624mm (24.56")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair