USED Ibanez Ibanez / Artist AR300 Cherry Sunburst [20]

This is a so-called Japan Vintage model of Ibanez made in Japan.
This is one of the most austere series of Ibanez guitars, featuring an arch top that seems to have been inspired by Les Paul style.
The pickups are mounted with the highly regarded super58, which is an excellent pickup with dry nuance, moderate power and glossy middle.
Flame maple top and mahogany back body give it a dense and bass tone that is recommended for pop, rock, jazz, blues, etc. * After we received this guitar, we cleaned it and put strings on it.

* After arrival at our store, it has been cleaned, strings replaced, rods adjusted, octave adjusted, string height adjusted, rubbed, and controls cleaned, so it is in good playing condition.

The pegs have been replaced with Gotoh pegs.
The gold parts have flaked off and there are some spots of chrome.
Overall, there are some minor scratches and dings, but considering its age, it is in relatively good condition.

Item rank: B+ (Good)

Year of manufacture: Made in 1981
Truss rod: There is room to spare
Fretboard: 60-70%.
Accessories ： Hard case / Non-genuine genuine pegs
Country of Origin ： Japan
Weight ： 4.43kg
Serial ： H814880

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|44.0mm
Neck thickness(near 1st fret)|20.8mm
Neck thickness (near 12th fret)|23.8mm
SCALE|628mm (24.75")
RADIUS|241mm (9.5")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
44.0mm

Neck Thickness (near 1st fret)
20.8mm

Neck Thickness (near 12th fret)
23.8mm

Scale
628mm (24.75")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning