USED Music Man Music Man / SUB1 Guitar Standard HH Textured White [20]

This is the "SUB 1 Guitar Standard HH", one of a small number of SUB series guitars produced by Musicman from 2004 to 2006.
This model is basically the same manufacturing process as the American lineup, but with simplified work/painting and selected parts to achieve an amazing cost-performance ratio.
The body is made of poplar, the neck is made of maple, and the fingerboard is made of rosewood. Long scale (25-1/2"" scale), approx. 42mm nut width, 10R, 22 frets, 5-point bolt-on construction.
This guitar also features a non-tremolo (hardtail bridge) and a metal toggle switch for the pickup selector.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and electrical repair, so it is in good playing condition.

There are some parts that have some chinks and minor rust, but other than that, it is in good condition with only minor scratches.

Item rank: B+ (Good)

Year of manufacture: Made in 2004
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 3.38kg
Serial ： X10313

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod.
Fretboard: No problem, enough fretboard height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.0mm
Neck thickness(near 1st fret)|21.1mm
Neck thickness (near 12th fret)|23.6mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
41.0mm

Neck Thickness (near 1st fret)
21.1mm

Neck Thickness (near 12th fret)
23.6mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair