USED Fender Japan Fender Japan / JB-45 3Tone Sunburst [20]

This model, which was produced as an entry-level model, has a basswood body, maple neck, rosewood fingerboard, and satin-finish neck.
It is a standard jazz bass with excellent cost performance, and is recommended not only as a first bass, but also for those who are looking for a reasonably priced Japanese-made jazz bass.

* After it arrived at our store, it has undergone cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and electrical repair.
The neck has a slight high spring symptom, and there is some chattering at the high frets when played hard.

There is a paint crack at the neck joint.
There are some parts have some rust and scratches, and some minor dents.

Item rank: B+ (Good)

Year of manufacture: 2004-2006
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Genuine
Country of Origin ： Japan
Weight ： 4.16kg
Serial ： MIJ R036233

Truss rod: No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height (bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|38.7mm
Neck thickness(near 1st fret)|20.4mm
Neck thickness (near 12th fret)|24.5mm
SCALE|864mm (34")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above the 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
38.7mm

Neck Thickness (near 1st fret)
20.4mm

Neck Thickness (near 12th fret)
24.5mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair