USED GRECO Greco / PB-750 Tetsu Yamauchi Model Natural [20]

This is the original model of Tetsu Yamauchi, the bass player of Faces at that time.
It was the first Greco artist model. It has a plug wood body and 1 piece maple neck, PB type split type PU109 pickup on the front and original double pole piece pickup PU118 on the rear.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted.
Near the truss rod limit, the frets are quite low and have been shimmed and adjusted.

There are some parts that have some cracks, rust, and peeling of plating.
There is a ding with a paint crack at the top of the head.
There are several small dents with paint dents on both sides of the body, and other minor scratches and small dents.

Item rank: B+ (Good)

Year of manufacture: 1977
Truss Rod ： Nearly fully tightened
Fretboard: less than 50%.
Accessories ： Hard Case / Genuine
Country of Origin ： Japan
Weight ： 3.84kg
Serial ： C773951

Truss rod: No problem, confirmed up to 60 degrees on both sides.
Fret remainder is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|2.7mm above 12th fret
String height(treble string side)|2.4mm above 12th fret
Nut width|42.8mm
Neck thickness(near 1st fret)|22.1mm
Neck thickness (near 12th fret)|23.8mm
SCALE|860mm (33.85")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right.

Fret remainder
Defective, need to consider replacing the frets at the next repair

String height (bass string side)
2.7mm above the 12th fret

String height (treble string side)
2.4mm above the 12th fret

Nut width
42.8mm

Neck Thickness (near 1st fret)
22.1mm

Neck Thickness (near 12th fret)
23.8mm

Scale
860mm (33.85")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment