USED YAMAHA Yamaha / AEX-1500 Natural [20]

Hollowbody made of sycamore, maple 3P neck, ebony fingerboard, approx. 640mm scale.
It is equipped with two types of pickups: a mellow and fat magnetic pickup and a raw and sparkling piezo pickup, which can be switched and mixed with the 3-way toggle switch. The 3-way toggle switch allows you to switch and mix, and the body-side piezo control allows you to adjust the 3-band EQ, mid frequency range, and PU balance, as well as fine-tune the sound.

* After it arrived at our store, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and electrical repairs have been done, so it is in good playing condition.

There are some scratches on the gold parts, but overall it is in good condition with only minor scratches and small dings.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories : Hard case / Genuine
Country of Origin ： Japan
Weight ： 2.96kg
Serial ： Q00029F

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.7mm
Neck thickness(near 1st fret)|20.3mm
Neck thickness(near 12th fret)|-
SCALE|640mm (25.19")
RADIUS|356mm (14")
Strings used for setup|D'Addario / .011-.052 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.7mm

Neck Thickness (near 1st fret)
20.3mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
640mm (25.19")

RADIUS
356mm (14")

Strings for setup
D'Addario / .011-.052 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair