USED Fernandes Fernandes / LA-85KK Ken Signature Model [20]

L'Arc~en~Ciel's LA-85KK is one of the most popular Ken signature models.
The bright red body with gold parts is sure to impress not only the fans but also the band members.
The controls are volume, 5-way selector, and rear coil tap switch.
This model is very easy to handle with a crisp and sharp Telecaster-like tone and strong sustain.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and deburring have been done.
The neck is a little high, and has been adjusted by fret adjustment, but it may get stuck when picking hard, but it sounds fine through the amp.

There are some parts that have some stains on them.
There are some minor scratches and dents overall, but considering its age, it is in relatively good condition.

Item rank: B+ (Good)

Truss rod: There is room to spare.
Fretboard: 60-70%.
Accessories: Gig bag/non-genuine arm
Weight ： 3.40kg
Serial : No

Truss Rod : No problem (Slightly high spring)
Fretboard: Still can withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.5mm
Neck thickness(near 1st fret)|20.0mm
Neck thickness (near 12th fret)|20.9mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, burr removal

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem (slight high spring).

Fret Remaining
There is a note that the frets are still low enough to withstand cutting.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.5mm

Neck Thickness (near 1st fret)
20.0mm

Neck Thickness (near 12th fret)
20.9mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and deburring