USED Gibson Memphis Gibson Memphis / ES-335 Dot Reissue Cherry [20]

The ES-335 reigns as the king of Gibson semi-acoustic models.
Laminated semi-hollow body with lightly floating figured body, short pickguard and dot inlays.
1950's style dot position marks and 1960's style slim taper neck are combined with two 57 Classic pickups for a deep tone.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

The certificate is missing.
The label inside the body is partially peeled off and there is a sticker mark on the back of the head near the serial part.
The pegs have been replaced and have the original holes.
There are some parts that have some rust and scratches, and there are many dents on the back of the body with scratches on the buckles and dents in the paint.
There is a paint chip on the corner of the F hole, and there are other small dents and scratches on the body back.

Item rank: B+ (Good)

Year of manufacture: Made in 2007
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 3.72kg
Serial ： 01647706

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.3mm
Neck thickness(near 1st fret)|19.8mm
Neck thickness (near 12th fret)|22.7mm
SCALE|624mm (24.56")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 43.3mm

Neck thickness(near 1st fret)19.8mm

Neck thickness (near 12th fret)22.7mm

SCALE624mm (24.56")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment