USED Fender Japan Fender Japan / TC72-70 Black [20]

This guitar is strongly reminiscent of Gibson guitars, with a basswood body, maple neck, Fender humbucking front and TL pickups in the rear, and 2VOL/2TONE controls.
The mellow sounding front Fender humbucking contrasts with the edgy rear PU, but in combination with the four controls, a wide range of sound makeup is possible.
The rear PU has been replaced with a Seymour Duncan STL-2.
String guide has been replaced.

* After it arrived at our store, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed together, and electrical repairs have been done, so it is in good playing condition.

There are paint cracks and dents on the corners of both sides of the head, and the strap pin at the end of the body is dented into the body.
There are numerous dents on the body corners and sides with paint cracks and dents, and a ding on the left front corner of the body top with a dent in the wood.
There are other minor scratches, dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 1997-1998
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： JAPAN
Weight ： 3.49kg
Serial ： CIJ O027583

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.7mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
41.7mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
23.0mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair