USED Fender USA Fender / American Vintage 70s Stratocaster Natural [20]

This Stratocaster is from the American Vintage series, which has remained popular due to its high quality even after production was discontinued.
It features a large head, F-key pegs, maple fingerboard, and heavyweight ash body.
It has a truss rod that can be adjusted from the head side and micro-tilt for adjusting the neck angle, making it very practical.

* The condition is good as it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and back panel sticker removed after our arrival.

There are some small scratches and dents on the body and a small paint crack at the neck joint.

Item rank: B+ (Good)

Year of manufacture: 2007
Truss Rod ： Plenty of room
Fretboard: 60-70%.
Accessories ： Hard Case / Genuine Non-Genuine Arm
Country of Origin ： USA
Weight ： 3.95kg
Serial ： V01186

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height: No problem, enough fret height.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.8mm
Neck thickness(near 1st fret)|21.8mm
Neck thickness (near 12th fret)|23.8mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, back panel sticker removal

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.8mm

Neck Thickness (near 1st fret)
21.8mm

Neck Thickness (near 12th fret)
23.8mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, back panel sticker removal