USED Gibson Montana Gibson / J-45 Standard Vintage Sunburst [20]

The J-45 is the most representative model of Gibson acoustic guitarsThe first model was produced in 1942, and it became a representative model of Gibson dreadnought as a versatile guitar that can be utilized for all purposes.
It is also one of the most responsive guitars.
The Eleaco specification makes this guitar a ready-to-play guitar for live performances and recordings.
A strap pin has been added at the neck joint.

* After our arrival, it has been cleaned, string replaced, rod adjusted, and bracing peeling corrected, so it is in good playing condition.

Since the neck was high, the saddle was replaced, refretted, fingerboard was corrected, and overall adjustment was made to correct the string height.
The clear paint on the top of the head is peeling off.
There are some parts that have some scratches and small dents.

After our arrival, cleaning, string replacement, rod adjustment, string height adjustment, fingerboard correction, refretting, and saddle replacement were performed.

Item rank: B+ (Good)

Year of manufacture: 2013
Truss Rod ： There is enough room
Fretboard : 80% or more
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 2.15kg
Serial ： 10183037

Truss Rod: No problem, confirmed up to 60 degrees left and right
Fretboard: No problem, enough fretboard height.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|43.7mm
Neck thickness(near 1st fret)|20.0mm
Neck thickness(near 12th fret)|-
Scale|628mm (24.75")
RADIUS|305mm (12")
Strings used for setup|SIT strings / .012-.054 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, string height adjustment, fingerboard correction, refretting, saddle replacement

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side): 2.5mm above 12th fret

String height (treble string side) 2.0mm above 12th fret

Nut width 43.7mm

Neck thickness(near 1st fret)20.0mm

Neck thickness (near 12th fret)

Scale628mm (24.75")

RADIUS305mm (12")

Strings at setupSIT strings / .012-.054 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, string height adjustment, fingerboard correction, refretting, saddle replacement