USED YAMAHA Yamaha / SA2000 Sunburst [20]

SA2000 is the top-of-the-line model of YAMAHA's SA series.
This model pursues a sound character that makes the most of the wood's ringing and the beauty of the wood grain.
With a block placed in the center of the body, it combines the mild sound of a semi-hollow with good response.
The body is made of birch and beech, the center block is made of spruce and maple, the neck is made of mahogany and the fingerboard is made of ebony wood materials.
There are some rusts due to aging, but the gorgeous metal parts of higher-end models give it a graceful appearance.

* After our arrival, it has been cleaned, strings replaced, rods adjusted, octave adjusted, string height adjusted, rubbed, controls cleaned, and front volume pot replaced, so it is in good condition.

Overall, there is some paint whitening due to aging.
There are scratches, dents, and rust on metal parts.
There is a sticker on the case.

Item rank: B (average)

Year of manufacture: Made in 1978
Truss Rod ： There is enough room.
Fret: 60-70%.
Accessories ： Hard Case / Genuine
Country of Origin ： JAPAN
Weight ： 4.10kg
Serial ： 002256

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.1mm
Neck thickness(near 1st fret)|21.5mm
Neck thickness (near 12th fret)|25.5mm
SCALE|628mm (24.75")
RADIUS|356mm (14")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning, front volume pot replacement

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 43.1mm

Neck thickness(near 1st fret)21.5mm

Neck thickness (near 12th fret)25.5mm

Scale628mm (24.75")

RADIUS356mm (14")

Strings D'Addario EXL110 / .010-.046 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning, front volume pot replacement