USED Chaki Chaki / P-80 [20]

This is a pick guitar by Japanese guitar maker CHAKI, which is well known for its folk and blues guitars.
The P-1 is a popular model, and this is a Venetian cutaway model.
Although it is old and we cannot be sure, it seems to be made of solid spruce top, maple side back, maple neck, and rosewood fretboard.

* The truss rod can be tightened, but it hardly moves and becomes less effective when the neck is straightened. There are some cracks and chips from the hole on the first string side of the bridge to the first string, so glue has been injected to fill in the chips and make them less noticeable.
In addition, the guitar has been cleaned, strings have been replaced, rods have been adjusted, octave has been adjusted, string height has been adjusted, and the strings have been rubbed together, so the guitar can be used without any problems in its current condition.

There are pickguard screw marks and paint cracks at the neck joint.
Scratches and dents are scattered throughout.

Item rank: B+ (Good)

Truss Rod: Nearly fully tightened.
Fretboard: 60-70%.
Accessories ： Hard case / Non-genuine
Country of Origin ： Japan
Weight ： 2.63kg
Serial ： 000119

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod (not much left)
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.9mm
Neck thickness(near 1st fret)|22.6mm
Neck thickness (near 12th fret)|-
SCALE|642mm (25.27")
RADIUS|254mm (10")
Strings used for setup|D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.9mm

Neck Thickness (near 1st fret)
22.6mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
642mm (25.27")

RADIUS
254mm (10")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing