USED Aria Aria / 40th Anniversary Limited Edition Model VM-2002 Candy Apple Red [20]

The limited edition model VM-2002 was released by Aria in 2002 as a 40th anniversary model of the famous Ventures model.
This model is based on VM-2001 with a modified tremolo.
The wood material is body binding, alder body, maple neck, and 22F rosewood fingerboard.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed together, and endpin looseness corrected, so it is in good playing condition.

There is a mark on the horn on the 1st string side where the strap pin hole was filled in.
There are some parts that have some scuffs and minor rust, and overall, there are some minor scratches and small dents.

Item rank: B+ (Good)

Truss rod: There is room to spare.
Fretboard: 60-70%.
Accessories ： Hard case / Genuine arm
Weight ： 3.83kg
Serial ： 08050642

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|40.7mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|23.5mm
SCALE|648mm (25.5")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, end pin looseness correction

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 40.7mm

Neck thickness(near 1st fret)21.0mm

Neck thickness (near 12th fret)23.5mm

Scale648mm (25.5")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, endpin looseness correction