USED Buscarino Buscarino / The Monarch Natural [20]

Buscarino (John Buscarino) guitars have been manufactured since 1981.
The guitars are known for their outstanding woodworking techniques, beautiful tone, and craft-like perfection, making them a favorite of many.
The guitars are made from the player's point of view and are known for their outstanding playability.
The Monarch is the second highest model after the Virtuoso, with a fine-grained, high-grade spruce body, side backs, and neck made of flame maple.
Ebony is used not only for the fingerboard, but also for the pickguard and tailpiece, giving it a high quality finish in both looks and sound.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed, and fret float corrected, so it is in good condition.

There are some bumps on the binding on both the 1st and 6th string side of the neck side due to wood shrinkage.
Paint is peeling on the binding of the body back. There are other small scratches and dents.

Item rank: B+ (Good)

Truss rod : There is enough room.
Fret : Less than 50%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 2.67kg
Serial ： JC1049498

Truss Rod : No problem.
Fretboard: Still can withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|46.0mm
Neck thickness(near 1st fret)|20.4mm
Neck thickness(near 12th fret)|-
SCALE|635mm (25")
RADIUS|305mm (12")
Strings used for setup|D'Addario EGC24 / .011-.050 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Still can withstand cutting, but the frets are low.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
46.0mm

Neck Thickness (near 1st fret)
20.4mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
635mm (25")

RADIUS
305mm (12")

Strings for setup
D'Addario EGC24 / .011-.050 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing