USED Moon Moon/ JJ-4 Blonde [20]

This JJ-4 is an early design type of the long-established brand Moon, which is famous as a domestic brand that can be said to be the originator of components.
Ash is used for the body material, and ebony fretboard is a feature.
Pickups are bartolini, preamp has been replaced with bartolini TCT because the original was defective.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, grated, and electrical repairs (preamp, battery snap, jack replaced), so it is in good playing condition.

There is a pickup fence installed next to the front pickup, and there are some paint chips and screw holes filled in.
There are several small dents with paint chips and dings on the corners of the head, and dents with paint dings on the corners and sides of the body.
There are several small dents with paint dents on the bottom of the body back, and there are dents with paint chips on the bottom corners of the body back.
There are other signs of use such as scratches and dents.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret: 60-70%.
Accessories : Soft case / Non-genuine
Country of Origin ： JAPAN
Weight ： 5.27kg
Serial ： 16272

Truss Rod : No problem, confirmed to be 60 degrees to the left and right
Fret height: No problem, enough fret height.
String height (bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|38.7mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|24.2mm
SCALE|864mm (34")
RADIUS|241mm (9.5")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (preamp, battery snap, jack replacement)

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This is a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
38.7mm

Neck Thickness (near 1st fret)
20.7mm

Neck Thickness (near 12th fret)
24.2mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (preamp, battery snap, jack replacement)