USED Fender USA Fender / American Professional II Stratocaster 3-Color Sunburst [20]

Body is alder, neck is maple & rosewood fingerboard. The fingerboard surface is 9.5 inches.
The neck shape is Deep C, and the overall thickness is thin with few peculiarities.
The P.U. is equipped with a V-Mod II Stratocaster Single-Coil.
The tremolo unit is a cold-rolled steel block with 2-point support.
The tone section of the bridge PU is a Push-Push type, and the neck PU is activated when the bridge PU is selected and turned on.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised, so it is in good playing condition.

It is in good condition with only minor scratches and small dings.

Item rank: B+ (Good)

Year of manufacture: 2021
Truss rod: There is plenty of room.
Fret: 60-70%.
Accessories ： Hard case / Genuine tremolo arm
Country of Origin ： USA
Weight ： 3.63kg
Serial ： US210024287

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.1mm
Neck thickness(near 1st fret)|20.4mm
Neck thickness (near 12th fret)|23.1mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.1mm

Neck Thickness (near 1st fret)
20.4mm

Neck Thickness (near 12th fret)
23.1mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing