USED Ibanez Ibanez / GB10 George Benson Signature Brown Sunburst [20]

This is a George Benson Signature model, a classic full-acoustic instrument that has been released over a long period of time.
The small body is easy to handle, and the sound has a good boxiness and sharpness, making it suitable not only for jazz, but also for funk and cutting.
The spruce top, maple side back, and maple neck are the base materials, and the original GB Special pickups are installed.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and parts replaced, so it is in good playing condition.
The truss rod is very low.

The gold parts have some rust, chipping, and peeling.
There are several small dents and dings on the back of the body, and dents and dings on the bottom and corners of the top of the body.
There are other minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 1990
Truss Rod ： Nearly fully tightened
Fretboard: 60-70% full
Accessories ： Hard Case / Genuine
Country of Origin ： Japan
Weight ： 3.16kg
Serial ： H009193

Truss Rod: No problem, confirmed up to 60 degrees left and right (not much left)
Fretboard: Still can withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|430.0mm
Neck thickness(near 1st fret)|20.5mm
Neck thickness(near 12th fret)|-
Scale|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|D'Addario EJ20 / .010-.049 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, parts replacement

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

There is a note on the truss rod. We have checked the rod to 60 degrees left and right, and there is no problem.

Fret remainder: Still can withstand cutting, but the frets are low.

String height (bass string side): 2.0mm above the 12th fret

String height (treble string side) 1.5mm above the 12th fret

Nut width 430.0mm

Neck thickness(near 1st fret)20.5mm

Neck thickness (near 12th fret)

Scale628mm (24.75")

RADIUS305mm (12")

Strings D'Addario EJ20 / .010-.049 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, parts replacement