USED Burny Burny / MG-85X hide Model Cherry Sunburst [20]

The MG-85X is a hide signature model that continues to attract many guitarists.
It has a mockingbird shape and coloring inspired by Les Paul's cherry sunburst.
The thin neck shape boasts high playability, and controls such as volume, PU selector, and direct switch are equipped with humbucker pickups.

The gold parts have some chinks and floating plating.
The 1F-3F neck joint is uneven, and the neck binding is darkened.
There are several dents and dings with paint chips and dings around the tips of the prongs, which are characteristic of deformed guitars.
There is paint burning near the strap pin at the bottom of the body.
There are paint chips at the neck joint, and there are scratches and darkening on the 15F neck.
There are also some dents and scratches with paint dents throughout.
The case that comes with the instrument has tears, holes, and holes in it, and the part where the pegs hit the case has been repaired with duct tape.

After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut groove adjustment

Item rank: B (average)

Truss rod : Tightened
Fretboard : 60-70
Accessories ： Gig bag/not genuine
Weight ： 2.85kg
Serial ： No serial number

Truss Rod: No problem with the neck at the limit of the rod.
Fretboard: Still can withstand cutting, but the frets are low.
String height (bass string side)|2.1mm above 12th fret
String height(treble string side)|1.6mm above 12th fret
Nut width|41.0mm
Neck thickness(near 1st fret)|20.5mm
Neck thickness (near 12th fret)|22.0mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and groove adjustment, nut groove adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: There is no problem with the neck at the limit of the rod.

Fret Remaining
There is a note that the frets are low, although they can still withstand cutting.

String Height (Bass String Side)
2.1mm above 12th fret

String height (treble string side)
1.6mm above 12th fret

Nut width
41.0mm

Neck Thickness (near 1st fret)
20.5mm

Neck Thickness (near 12th fret)
22.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, rubbing, nut groove adjustment