USED Fender USA Fender / Lead III Black [20]

The Lead Series electric guitar features a compact, slim body and a unique switching system.
A total of seven different tones can be switched using the two 3-position selectors.
It has a powerful and fat sound that is more than just excellent sustain and compact looks.
One screw has been replaced, but the guitar is highly original.

The neck is twisted and the 6th string side has a high hang, but there is no sound clogging. One screw of the rear pickup has been replaced.
There are many scratches and dents overall, and the edge near the serial number on the head is slightly chipped.
There are also paint cracks on both sides of the neck joint.

After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise adjustment, and electrical repair.

Item rank: B+ (Good)

Year of manufacture: 1983
Truss Rod : Plenty of room
Fretboard : 60～70
Accessories ： Hard case / Non-genuine
Country of Origin ： USA
Weight ： 3.43kg
Serial ： E105817

Truss Rod: No problem, confirmed up to 60 degrees to the left and right (with torsion)
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|20.0mm
Neck thickness (near 12th fret)|22.2mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

Truss rod is fine (with twist).

No fret remainder problem, enough fret height.

String height (bass string side): 2.0mm above the 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 42.2mm

Neck thickness(near 1st fret)20.0mm

Neck thickness (near 12th fret)22.2mm

Scale648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair