USED Gibson Custom Shop / Historic Collecrtion 1957 Les Paul Junior Single Cut Vintage Sunburst [20]

With an all-mahogany body, rosewood fingerboard, and a single P-90 pickup, Les Paul Junior is a simple spec with a straightforward output.
The wraparound bridge and mahogany give it a warm midrange, and the slab body, which is thinner than the standard, makes it sound more powerful and dynamic than you would expect despite its light weight.
The certificate is missing, but all parts are original.

The certificate is missing.
There is a ding with a dent on the corner of the head, and many dings with dents on the body back and body sides.
There are several small dents with dings on the bottom of the body top, and there is a stand burn around the side of the jack.
There is a small ding on the top corner of the body with paint chipping.
There are also some other signs of use such as scratches and small dents.

After receiving the instrument, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment have been performed.

Item rank: B+ (Good)

Year of manufacture: 2010
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 3.36kg
Serial ： 701408

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fretboard: No problem, enough fretboard height
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.5mm
Neck thickness(near 1st fret)|23.5mm
Neck thickness (near 12th fret)|25.8mm
SCALE|624mm (24.56")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 43.5mm

Neck thickness(near 1st fret)23.5mm

Neck thickness (near 12th fret)25.8mm

SCALE624mm (24.56")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment