USED Gibson USA Gibson / B.B.King Lucille [20]

The 335-shaped body has no F-holes, minimizing feedback to a minimum.
Fine tuners in the tailpiece allow fine tuning adjustment.
The body and neck are made of maple without mahogany.
Mounted pickups are 490T & 490R, which emphasize the midrange and support BB King's sweet, fat, and unique sound.

The neck is a little wavy, and it has been adjusted by fret adjustment.
The gold parts have rust and scratches, and the control knobs have internal cracks.
There is a faint weather check on the lower part of the body top, and there are many scratches on the overall surface.
There are bumps on the binding on both sides of the body, and clear paint chips on the lower binding of the body back.
There is a small ding in the center of the body back, and other small dings and scratches.

After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and matching.

Item rank: B+ (Good)

Year of manufacture: 1997
Truss rod: There is enough room.
Fretboard : 60～70
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 4.41kg
Serial ： 93107459

Truss Rod: No problem (slight waviness)
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.6mm
Neck thickness(near 1st fret)|19.8mm
Neck thickness (near 12th fret)|24.3mm
SCALE|624mm (24.56")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

Truss rod is fine (with a slight waviness).

No fret remaining problem, enough fret height

String height (bass string side): 2.0mm above the 12th fret

String height (treble string side) 1.5mm above the 12th fret

Nut width 42.6mm

Neck thickness(near 1st fret)19.8mm

Neck thickness (near 12th fret)24.3mm

SCALE624mm (24.56")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment