USED Fernandes Fernandes / ZO-3 BLEACH [20]

The ZO-3 is a Fernandez "ZO-3", synonymous with mini-guitars with built-in amps.
This instrument was created in collaboration with the comic BLEACH and is a very rare piece.
Its 9V battery operation allows you to play without an amp anytime, anywhere.
It is equipped with jacks that can be connected to output from an amp or to effectors.
The compact body makes this electric guitar easily portable.

There are some parts with chinks and minor rust, and there are several dings with paint chips and paint cracks on the top corners of the body.
There are several dents on the side of the body with paint dents, and a small ding on the corner of the head with paint chips and wood dents.
There are other signs of use such as minor line scratches and small dents.
There is a paint crack on the first string side of the neck pocket.

After receiving the guitar, it has been cleaned, strings have been replaced, rods have been adjusted, octave has been adjusted, and string height has been adjusted.

Item rank: B+ (Good)

Year of manufacture: 2009
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Soft case / Non-genuine
Weight ： 2.89kg
Serial ： FG09041073

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.6mm
Neck thickness(near 1st fret)|20.4mm
Neck thickness (near 12th fret)|22.3mm
SCALE|610mm (24")
RADIUS|356mm (14")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 41.6mm

Neck thickness(near 1st fret)20.4mm

Neck thickness (near 12th fret)22.3mm

Scale610mm (24")

RADIUS356mm (14")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment