USED Fender Japan Fender Japan / TL52-TX Vintage Natural [20]

TL52 TX model with Texas Special pickups for the '52 Telecaster, the classic electric guitar by the Fender Japan brand.
Ash body and maple 1-piece neck are made of the most popular Telecaster material.
Button-type string guide, negative screws, and other specifications from 1952 are reproduced.

There are dents on the top of the body near the bridge, clear paint cracks and dents on both sides of the body, and repaired cracks in the paint at the neck joint.
There is a stain near the strap pin on the end of the body.
There are some parts that have some rust and scratches, and some minor dents and dings.

After receiving the instrument, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment have been performed.

Item rank: B+ (Good)

Year of manufacture: 2006-2008
Truss rod : Plenty of room
Fretboard: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： Japan
Weight ： 3.88kg
Serial ： CIJ S095379

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.7mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|23.6mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 42.7mm

Neck thickness(near 1st fret)21.0mm

Neck thickness (near 12th fret)23.6mm

Scale648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment