USED Fender Japan Fender Japan / STR-75 CRS/R [20]

Rare Floyd Rose type equipped model from Fender Japan.
This STR model with rock tremolo was produced in the 1980s.
The heeled joint and S-S-H layout are modern specs that were in vogue at the time.
It is equipped with jumbo frets, so it is especially recommended for those who prefer technical playing.

When this guitar arrived in Japan, there was a defect in the pickups and all of them have been replaced.
There are many small dents and dings around the head, and the sides of the neck are darkened.
There is a crack in the clear paint at the neck joint and dents on the side of the body.
There are several small dents and dings on the body back contour and under the top of the body.
The gold parts have some rusting and chrome fading, and there are scratches and small dents throughout the instrument.

After arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, pickup replacement, selector switch, and control pot cleaning.

Item rank: B+ (Good)

Year of manufacture: 1984-1987
Truss Rod : Plenty of room
Fretboard: 60-70%.
Accessories : Gig bag / Non-genuine arm
Country of Origin ： Japan
Weight ： 3.81kg
Serial ： MIJ E849885

Truss Rod: No problem.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|20.6mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, pickup replacement, selector switch, control pot cleaning

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but not necessarily in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 42.0mm

Neck thickness(near 1st fret)20.6mm

Neck thickness (near 12th fret)23.0mm

Scale648mm (25.5")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, pickup replacement, selector switch, control pot cleaning