USED Ibanez Ibanez / RGD71ALPA-CFK Charcoal Burst Black Stained Flat [20]

26.5" (673mm) scale suitable for tuning down, does not compromise the tension feeling of the strings, and responds quickly to the rise of sound and picking response.
Poplar burl burl top / layered ash & nyato laminate body, highly rigid Nitro Wizard neck made of 5pc panga-panga and walnut wood.
The Bare Knuckle Aftermath pickups are equipped with a coil tap switch, allowing for a wide variety of sound creation from full output modern sounds to low output vintage tastes.

There is minor rust on parts and small dents on the top and corners of the head.
There are many small dents on the body corners and sides with wood dents, paint cracks and dings, and other minor scratches and dings.

After receiving the instrument, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, correction of sticking of all saddle imo screws, and replacement of one 7-string saddle imo screw.

Item rank: B+ (Good)

Year of manufacture: Made in 2021
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： INDONESIA
Weight ： 3.69kg
Serial ： 210715426

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.3mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|48.0mm
Neck thickness(near 1st fret)|19.5mm
Neck thickness (near 12th fret)|21.5mm
SCALE|686mm (26.5")
RADIUS|508mm (20")
Strings for setup|D'Addario EXL110-7 / .010-.059 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fix all saddle imo screws sticking - Replace 1 saddle imo screw on the 7th string

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side): 2.3mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 48.0mm

Neck thickness(near 1st fret)19.5mm

Neck thickness (near 12th fret)21.5mm

SCALE686mm (26.5")

RADIUS508mm (20")

Strings D'Addario EXL110-7 / .010-.059 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fix all saddle imo screws sticking - Replace one 7-string saddle imo screw