USED FENDER JAPAN (-2015) / 1986 PB57-55 Black Precision Bass [20]

A 1986 Fender Japan Precision Bass "PB57-55"
A '50s-style Precision Bass that follows the classic '57 style.
Features a basswood body, a one-piece maple neck with a maple fingerboard, a single-ply pickguard, and a 34-inch long scale with 20 frets.
This instrument is known for its rich, powerful Precision Bass sound that really shines in an ensemble, and its well-defined tone makes it a valuable asset for recording as well.

The neck was refinished quite some time ago; there is discoloration on the fingerboard and along the fingerboard edges, and there are dents with paint chips on the lower back of the headstock and on the neck at the 1st fret.
There are numerous dents accompanied by paint chips and dents across the entire body.
The pickguard is warped, and the hardware shows signs of tarnish and rust; there are also general scuffs and dents throughout the instrument.

Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: MIJ E672257
Year of Manufacture: 1986
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.89 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems
Fret Wear: No issues; in like-new condition
String Height (Low String Side): 2.5 mm at the 12th fret
String Action (Low String Side): 2.0 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 24.2 mm
Scale: 864 mm (34")
RADIUS: 184 mm (7.25")
Strings at Setup: D’Addario EXL165 / .045-.105 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair (potentiometer replacement, jack replacement), fret replacement, nut replacement, bridge replacement, knob replacement, pickup mounting screw replacement, pickguard screw replacement

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.