USED DRAGONFLY / Border 666 Black Half Matt [20]

BORDER’s Border 666 is an original design that prioritizes playability.
While the body features a traditional flat-top design, the contoured edges are smoothly rounded to reduce stress on the area where the elbow rests.
The 666 scale is 18 mm longer than the standard long scale (648 mm); this maintains string tension even when tuning down to lower pitches, resulting in a “tight” low-end sound.
It is equipped with the original HAF-5T-B4-HARRY M32123 and HAF-N4-HARRY M32122 pickups.
The Dragonfly control, which utilizes high- and low-pass filters, allows you to cut high and low frequencies with a single control.
Cryogenically treated stainless steel HYBRID-2#214 frets are standard.

There are numerous dents accompanied by paint peeling, cracking, and dents on both corners of the body, and the satin finish on the entire body has a glossy sheen.
The 2F neck has paint peeling, and there are numerous scratches and dents with indentations throughout.

Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use

Serial Number: X19081S
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.73 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 42.7 mm
Neck thickness near the 1st fret: 21.6 mm
Neck thickness near the 12th fret: 23.1 mm
Scale: 666 mm (26.2")
RADIUS: 305 mm (12")
Strings at Setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, deburring, and installation of selector switch knob

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives.

* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.