USED Paul Reed Smith (PRS) Paul Reed Smith / CE24 Faded Blue Smokeburst [20]

The "CE 24" was introduced in the late 1990s and has long been produced as a highly finished guitar despite its bolt-on neck design.
The neck is made of maple with a matte lacquer finish.
Two "85/15" pickups are mounted.
It features a wide-range, quirky tone, and can perfectly handle various characters from a modern high-gain sound to a super-clear single tone with the tone pot coil tap on, all with just one guitar.

* It has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised after our arrival, so it is in good playing condition.

The spec sheet is missing and we cannot tell the neck shape.
There are many small dents with paint peeling and paint cracking throughout the body.
There are other minor scratches, small dings, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: Made in 2020
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Gig bag / Genuine arm
Country of Origin ： USA
Weight ： 3.44kg
Serial ： 20 0304950

Truss Rod: No problem.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.5mm
Neck thickness(near 1st fret)|20.5mm
Neck thickness (near 12th fret)|21.8mm
SCALE|635mm (25")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.5mm

Neck Thickness (near 1st fret)
20.5mm

Neck Thickness (near 12th fret)
21.8mm

Scale
635mm (25")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing